Installation [10/2018 - 07/2022]: Procedure

INSTALL COMBINATION METER ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Engage the guides.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Engage the clamps.

INSTALL METER HOOD SUB-ASSEMBLY
Refer to PROCEDURE - Step 23 [07/2022 - ] , or refer to PROCEDURE - Step 23 [08/2021 - 07/2022]
INSTALL NO. 1 DEFROSTER NOZZLE GARNISH
Refer to PROCEDURE - Step 25 [07/2022 - ] , or refer to PROCEDURE - Step 25 [08/2021 - 07/2022]
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
- for Gasoline Model:
  Refer to INSTALLATION [10/2018 - 07/2022]
- for HV Model:
  Refer to INSTALLATION [10/2018 - ]
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [10/2018 - 07/2022]
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS (for Power Tilt and Power Telescopic Steering Column)
Refer to CUSTOMIZE PARAMETERS [10/2018 - ]