LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 250h Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Clock >> Inspection [10/2018 - 07/2022] >> Procedure

Inspection [10/2018 - 07/2022]: Procedure

  1. INSPECT CLOCK ASSEMBLY 
    1. Check illumination.
      1. Apply auxiliary battery voltage to the clock assembly and check that it illuminates.
        Fig 1: Clock Assembly Connector End View
        GTY808117Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Clock Assembly)

        OK

        Tester Connection Specified Condition
        Auxiliary battery positive (+) → 3 (ILL+)
        Auxiliary battery positive (-) → 8 (ILL-)        		 Illuminates

        If the result is not as specified, replace the clock assembly.

scientia non olet · About LEMON Manuals