LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) System (K120) (Service Information) (2 Of 2) >> Combination Switch >> Removal [10/2018 - 07/2022] >> Procedure

Removal [10/2018 - 07/2022]: Procedure

  1. REMOVE METER HOOD SUB-ASSEMBLY 

    Refer to REMOVAL [10/2018 - 07/2022]

  2. REMOVE COMBINATION SWITCH ASSEMBLY (SATELLITE SWITCH SET) 
    1. Disengage the clamp to disconnect the wire harness from the meter hood sub-assembly.
      GTY798562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the combination switch assembly (satellite switch set) connector.
    3. Remove the 3 screws and combination switch assembly (satellite switch set) from the meter hood sub-assembly.
      GTY798572Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 3 claws and guide to remove the No. 2 instrument panel hole cover from the meter hood sub-assembly.
      GTY798571Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals