LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance (Service Information) >> M20A-FKS Auxiliary Battery >> Removal [10/2018 - 07/2022] >> Procedure

Removal [10/2018 - 07/2022]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Refer to PRECAUTION [10/2018 - 07/2022]

  2. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL 
    1. Loosen the nut and disconnect the cable from the negative (-) auxiliary battery terminal.
      GTY832850Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Refer to INITIALIZATION [10/2018 - 07/2022]

  3. REMOVE AUXILIARY BATTERY 
    1. Disengage the 2 claws to remove the fusible link cover.
      GTY800643Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Loosen the nut.
      GTY832851Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the clamp and disconnect the cable from the positive (+) auxiliary battery terminal.
      GTY800642Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the positive (+) auxiliary battery terminal from the auxiliary battery.
    5. Remove the battery insulator from the auxiliary battery.
      GTY800651Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Remove the bolt and No. 2 battery clamp.
      GTY800653Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. Remove the auxiliary battery from the vehicle.
      GTY800652Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals