LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance (Service Information) >> M20A-FKS Auxiliary Battery >> Installation [10/2018 - 07/2022] >> Procedure

Installation [10/2018 - 07/2022]: Procedure

  1. INSTALL AUXILIARY BATTERY 
    1. Install the auxiliary battery to the vehicle.
    2. Install the No. 2 battery clamp with the bolt.
      GTY800648Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 15.4 N.m (157 kgf/cm, 11 ft.lbf) 

    3. Install the battery insulator to the auxiliary battery.
    4. Connect the cable to the positive (+) auxiliary battery terminal and engage the clamp.
    5. Tighten the nut.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    6. Engage the 2 claws and install the fusible link cover.
  2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    1. Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

      NOTE:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Refer to INITIALIZATION [10/2018 - 07/2022]

scientia non olet · About LEMON Manuals