LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronically Controlled Brake System (Diagnostic Codes (4 Of 4) & Circuit Tests) (Hybrid)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> Brake Hold Standby Indicator Light Circuit [10/2018 - ] >> Description

Brake Hold Standby Indicator Light Circuit [10/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

The brake hold standby indicator light turns on if brake hold control is possible when the following conditions required for operation standby are met and the brake hold switch (combination switch assembly) is turned on while the power switch is on (IG).

  1. Conditions required for operation standby:
    1. The driver side door is closed.
    2. The driver side seat belt is fastened.
    3. The system is normal.
scientia non olet · About LEMON Manuals