LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Battery / Charging System (M20A-FXS) (Service Information)) >> Battery Current Sensor >> Components [10/2018 - ]

Components [10/2018 - ]

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Battery Current Sensor Replacement Components With Torque Specifications
GTY780462Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*1 NO. 2 DECK BOARD SUB-ASSEMBLY *2 LUGGAGE COMPARTMENT TRIM BOX
*3 DECK FLOOR BOX RH *4 BATTERY STATE SENSOR ASSEMBLY
*5 EARTH WIRE *6 AUXILIARY BATTERY HOSE
*7 BATTERY CURRENT SENSOR HOLDER - -
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N.m (kgf/cm, ft.lbf) N.m (kgf/cm, ft.lbf): Specified torque