How To Proceed With Troubleshooting [10/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- VEHICLE BROUGHT TO WORKSHOP
Result
Proceed to NEXT Result:
NEXT
See step 2
- CONFIRM PROBLEM SYMPTOMS
Result
Proceed to NEXT Result:
NEXT
See step 3
- CUSTOMER PROBLEM ANALYSIS
- Check if the vehicle has been jump started due to a discharged auxiliary battery.
Result
Result Proceed to The vehicle has never been jump started. A The vehicle has been jump started due to a discharged auxiliary battery. B
Result:
B
GO TO ON-VEHICLE INSPECTION / CHECK AUXILIARY BATTERY VOLTAGE. Refer to PROCEDURE - Step 2
Result:
A
See step 4
- Check if the vehicle has been jump started due to a discharged auxiliary battery.
- CAN COMMUNICATION SYSTEM CHECK
- Using the Techstream, display the CAN Bus Check screen and check that all ECUs and sensors that are connected to the CAN communication system are displayed on the screen.
Result
Proceed to OK NG
Result:
NG
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ]
Result:
OK
See step 5
- Using the Techstream, display the CAN Bus Check screen and check that all ECUs and sensors that are connected to the CAN communication system are displayed on the screen.
- CHECK FOR DTCS
Result
Result Proceed to DTCs are not output. A DTCs are output. B Result:
B
GO TO DTC CHART
Result:
A
See step 6
- ON-VEHICLE INSPECTION
Result
Result Proceed to Malfunctioning area has not been determined. A Malfunctioning area has been determined. B Result:
B
See step 8
Result:
A
See step 7
- CHECK FOR INTERMITTENT PROBLEMS
Result
Proceed to NEXT Result:
NEXT
See step 8
- REPAIR OR REPLACE
Result
Proceed to NEXT Result:
NEXT
END