LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Dynamic Radar Cruise Control System (Diagnostics - Introduction) (Hybrid)) >> DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model) >> Diagnosis System [10/2018 - ] >> Diagnosis System [10/2018 - ]

Diagnosis System [10/2018 - ]

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. DIAGNOSIS FUNCTION 
    1. The diagnosis function turns off the cruise control indicator and displays a warning message when a malfunction is detected. When a malfunction is detected in the dynamic radar cruise control system, DTCs are stored in the hybrid vehicle control ECU or forward recognition camera.
      GTY797090Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Cruise Control Indicator
      (Constant Speed Control Mode)
      *b Cruise Control Indicator
      (Vehicle-to-vehicle Distance Control Mode)
      NOTE:

      As data stored in the ECU will be cleared, do not remove any fuses or disconnect the cable from the negative (-) auxiliary battery terminal before the inspection is complete.

      HINT: 

      When the system returns to normal, the warning message "Cruise Control Malfunction Visit Your Dealer" displayed on the multi-information display will be cleared.