LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Can Communication System (Diagnostic Codes & Symptom Tests (1 Of 3)) (Hybrid)) >> CAN COMMUNICATION SYSTEM (for HV Model) >> Suspension Control ECU Communication Stop Mode [07/2022 - ] >> Description

Suspension Control ECU Communication Stop Mode [07/2022 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
Detection Item Symptom Trouble Area
Suspension Control ECU Communication Stop Mode Any of the following conditions are met:
  • Communication stop for "Suspension Control (Air Suspension)" is indicated on the "Communication Bus Check" screen of the GTS.

    Refer to PROBLEM SYMPTOMS TABLE [07/2022 - ]

  • Communication stop history for "Suspension Control (Air Suspension)" is indicated on the "Communication Bus Check (Detail)" screen of the GTS. (The Lost Communication Time value for "Suspension Control (Air Suspension)" is 6 or more.)

    Refer to PROBLEM SYMPTOMS TABLE [07/2022 - ]

  • Communication system DTCs (DTCs that start with U) that correspond to "Suspension Control ECU Communication Stop Mode" in "DTC Combination Table" are output.

    Refer to DTC COMBINATION TABLE [07/2022 - ]

  • Absorber control ECU CAN branch line or connector
  • Power source circuit of absorber control ECU
  • Absorber control ECU ground circuit
  • Absorber control ECU