LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Can Communication System (Diagnostic Codes & Symptom Tests (1 Of 3)) (Hybrid)) >> CAN COMMUNICATION SYSTEM (for HV Model) >> Radio Receiver Assembly Communication Stop Mode [07/2022 - ] >> Description

Radio Receiver Assembly Communication Stop Mode [07/2022 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
Detection Item Symptom Trouble Area
Radio Receiver Assembly Communication Stop Mode Any of the following conditions are met:
  • Communication stop for "Display and Navigation (AVN)" is indicated on the "Communication Bus Check" screen of the Techstream.

    Refer to PROBLEM SYMPTOMS TABLE [07/2022 - ]

  • Communication stop history for "Display and Navigation (AVN)" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Display and Navigation (AVN)" is 6 or more.)

    Refer to PROBLEM SYMPTOMS TABLE [07/2022 - ]

  • Communication system DTCs (DTCs that start with U) that correspond to "Radio Receiver Assembly Communication Stop Mode" in "DTC Combination Table" are output.

    Refer to DTC COMBINATION TABLE [07/2022 - ]

  • Radio receiver assembly branch line or connector
  • Power source circuit of radio receiver assembly
  • Radio receiver assembly ground circuit
  • Radio receiver assembly