LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Can Communication System (Diagnostic Codes & Symptom Tests (1 Of 3)) (Hybrid)) >> CAN COMMUNICATION SYSTEM (for HV Model) >> DTC B1003: ECU Malfunction [10/2018 - ] >> Procedure

DTC B1003: ECU Malfunction [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. RECONFIRM DTC OUTPUT 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.

      Body Electrical > Central Gateway > Trouble Codes 

      Result

      Result Proceed to
      DTC B1003 is not output from the central gateway ECU (network gateway ECU) A
      DTC B1003 is output from the central gateway ECU (network gateway ECU) B

    Result: 

    A 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ] 

    Result: 

    B 

    REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU). Refer to  REMOVAL [10/2018 - 07/2022]  , or refer to  REMOVAL [07/2022 - ] 

scientia non olet · About LEMON Manuals