LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Intake System / Exhaust System (M20A-FXS) (Service Information)) >> Exhaust Pipe >> Components [10/2018 - ]

Components [10/2018 - ]

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exhaust Pipe Replacement Components With Torque Specifications (1 Of 4)
GTY823718Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*1 FRONT FLOOR COVER LH *2 FRONT FLOOR COVER RH
N.m (kgf/cm, ft.lbf): Specified torque - -
Fig 2: Exhaust Pipe Replacement Components With Torque Specifications (2 Of 4)
GTY825678Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*A Type A *B Type B
*1 TAIL EXHAUST PIPE ASSEMBLY *2 COMPRESSION SPRING
N.m (kgf/cm, ft.lbf): Specified torque - -
Fig 3: Exhaust Pipe Replacement Components With Torque Specifications (3 Of 4)
GTY790989Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*1 FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) *2 FRONT FLOOR CENTER BRACE
*3 COMPRESSION SPRING *4 EXHAUST PIPE GASKET
N.m (kgf/cm, ft.lbf): Specified torque Non-reusable part
Fig 4: Exhaust Pipe Replacement Components With Torque Specifications (4 Of 4)
GTY793330Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*1 NO. 2 AIR FUEL RATIO SENSOR *2 WIRE HARNESS CLAMP BRACKET
N.m (kgf/cm, ft.lbf): Specified torque * For use with SST