Components [10/2018 - ]

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exhaust Manifold Replacement Components With Torque Specifications (1 Of 4)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	NO. 1 ENGINE UNDER COVER ASSEMBLY	-	-
	N.m (kgf/cm, ft.lbf): Specified torque	-	-

Fig 2: Exhaust Manifold Replacement Components With Torque Specifications (2 Of 4)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	FRONT FLOOR COVER LH	*2	FRONT FLOOR COVER RH
	N.m (kgf/cm, ft.lbf): Specified torque	-	-

Fig 3: Exhaust Manifold Replacement Components With Torque Specifications (3 Of 4)

*1	FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)	*2	FRONT FLOOR CENTER BRACE
*3	NO. 1 FRONT FLOOR HEAT INSULATOR	*4	EXHAUST PIPE GASKET
*5	COMPRESSION SPRING	-	-
	N.m (kgf/cm, ft.lbf): Specified torque	•	Non-reusable part

Fig 4: Exhaust Manifold Replacement Components With Torque Specifications (4 Of 4)

*1	EXHAUST MANIFOLD (TWC: Front Catalyst)	*2	MANIFOLD STAY
*3	NO. 1 EXHAUST MANIFOLD HEAT INSULATOR	*4	NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
*5	WIRE HARNESS CLAMP BRACKET	*6	EXHAUST MANIFOLD TO HEAD GASKET
	N.m (kgf/cm, ft.lbf): Specified torque	*	For use with a union nut wrench
•	Non-reusable part	-	-