LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Can Communication System (Symptom Tests) (3 Of 3) (Hybrid)) >> CAN COMMUNICATION SYSTEM (for HV Model) >> Front Camera Module Communication Stop Mode [07/2022 - ] >> Description

Front Camera Module Communication Stop Mode [07/2022 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
Detection Item Symptom Trouble Area
Front Camera Module Communication Stop Mode Any of the following conditions are met:
  • Communication stop for "Front Camera Module" is indicated on the "Communication Bus Check" screen of the Techstream.

    Refer to PROBLEM SYMPTOMS TABLE [07/2022 - ]

  • Communication stop history for "Front Camera Module" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Front Camera Module" is 6 or more.)

    Refer to PROBLEM SYMPTOMS TABLE [07/2022 - ]

  • Communication system DTCs (DTCs that start with U) that correspond to "Front Camera Module Communication Stop Mode" in "DTC Combination Table" are output.

    Refer to DTC COMBINATION TABLE [07/2022 - ]
  • Forward recognition camera branch line or connector
  • Power source circuit of forward recognition camera
  • Forward recognition camera ground circuit
  • Forward recognition camera
scientia non olet · About LEMON Manuals