Typical Enabling Conditions
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
| All of the following conditions are met | - |
| Power switch | Off |
| Engine | Stall |
| Soak time | 6, 6.5 and 7 hours |
| Time after ECM power on | 0.5 seconds or more |
| One of the following conditions is met | (a) or (b) |
| (a) Engine control module internal temperature | -10°C (14°F) or higher |
| (b) Intake air temperature | -10°C (14°F) or higher |
| Engine control module internal temperature sensor circuit fail (P06AD, P06AE) | Not detected |
| Intake air temperature sensor circuit fail (P0112, P0113) | Not detected |
| Soak timer fail (P2610) | Not detected |
| Auxiliary battery voltage | 8 V or higher |