LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Engine Control System (SFI) (M20A-FXS) - Diagnostic Codes (4 Of 6) (Hybrid)) >> SFI System >> DTC P062F-44: Internal Control Module EEPROM Data Memory Failure [10/2018 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
ALL

Monitor runs whenever the following DTCs are not stored None
CASE 1

All of the following conditions are met -
Permanent fault code Not stored
OBDII system commands Store
Auxiliary battery voltage 8 V or higher
CASE 2

All of the following conditions are met -
Permanent fault code Stored
OBDII system commands Clear
Auxiliary battery voltage 8 V or higher
CASE 3

Auxiliary battery voltage 8 V or higher
scientia non olet · About LEMON Manuals