LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Hybrid Transaxle (P711) (Service Information)) >> Shift Lever >> Reassembly [10/2018 - ] >> Procedure

Reassembly [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LOWER POSITION INDICATOR HOUSING 
    1. Engage the 4 claws and 2 guides to install the lower position indicator housing to the shift lock control unit assembly.
      GTY798545Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the lower position indicator housing.

  2. INSTALL SHIFT POSITION INDICATOR 
    1. Install the shift position indicator to the upper console panel sub-assembly with the 2 screws.
      GTY798589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 clamps to connect the wire harness.
      GTY798587Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals