Inspection [10/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SHIFT LEVER POSITION SENSOR
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 7 (+B) - 3 (PR) Shift lever in P Below 1 Ω 7 (+B) - 4 (PNB) Below 1 Ω 7 (+B) - 8 (P) Below 1 Ω 7 (+B) - 1 (DB1), 2 (N), 6 (DB2) or 9 (R) Shift lever in P 10 kΩ or higher 7 (+B) - 3 (PR) Shift lever in R Below 1 Ω 7 (+B) - 9 (R) Below 1 Ω 7 (+B) - 1 (DB1), 2 (N), 4 (PNB), 6 (DB2) or 8 (P) Shift lever in R 10 kΩ or higher 7 (+B) - 2 (N) Shift lever in N Below 1 Ω 7 (+B) - 4 (PNB) Below 1 Ω 7 (+B) - 1 (DB1), 3 (PR), 6 (DB2), 8 (P) or 9 (R) Shift lever in N 10 kΩ or higher 7 (+B) - 1 (DB1) Shift lever in D or S Below 1 Ω 7 (+B) - 6 (DB2) Below 1 Ω 7 (+B) - 2 (N), 3 (PR), 4 (PNB), 8 (P) or 9 (R) Shift lever in D or S 10 kΩ or higher Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*a Component without harness connected
(Shift Lever Position Sensor)HINT:
The shift lever position sensor connector (shift lever position sensor side) does not have a terminal 5.
If the result is not as specified, replace the shift lever position sensor.
- Measure the resistance according to the value(s) in the table below.