LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Hybrid Transaxle (P711) (Service Information)) >> Combination Switch >> Installation [10/2018 - 07/2022] >> Procedure

Installation [10/2018 - 07/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL COMBINATION SWITCH ASSEMBLY (SATELLITE SWITCH SET) 
    1. Engage the 3 claws and guide to install the No. 2 instrument panel hole cover to the meter hood sub-assembly.
    2. Install the combination switch assembly (satellite switch set) to the meter hood sub-assembly with the 3 screws.
    3. Connect the combination switch assembly (satellite switch set) connector.
    4. Engage the clamp to connect the wire harness to the meter hood sub-assembly.
  2. INSTALL METER HOOD SUB-ASSEMBLY 

    Refer to INSTALLATION [10/2018 - 07/2022]

scientia non olet · About LEMON Manuals