LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Hybrid Control System (Diagnostic Codes (5 Of 5) & Circuit Tests)) >> Hybrid Control System >> DTC U0424-81: HVAC Control Module to Hybrid Powertrain Control Module Invalid Serial Data Received [10/2018 - ] >> Procedure

DTC U0424-81: HVAC Control Module to Hybrid Powertrain Control Module Invalid Serial Data Received [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (AIR CONDITIONER) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.
    4. Check if DTCs related to the air conditioning system (A/C) are output.

      Body Electrical > Air Conditioner > Trouble Codes 

      Result

      Result  Proceed to
      DTCs related to A/C are not output. A
      DTCs related to A/C are output. B
    5. Turn the power switch off.

    Result: 

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY. Refer to  REMOVAL [10/2018 - 07/2022]  Refer to  REMOVAL [07/2022 - ] 

    Result: 

    GO TO DTC CHART (AIR CONDITIONING SYSTEM). Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2018 - 10/2019]  Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2019 - 10/2020]  Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2020 - 07/2022]  Refer to  DIAGNOSTIC TROUBLE CODE CHART [07/2022 - ]