LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Lubrication System (M20A-FXS) (Service Information)) >> Oil Pump >> Installation [10/2018 - ] >> Procedure

Installation [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6

  2. INSTALL STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 7

  3. INSTALL ENGINE OIL LEVEL SENSOR 

    See step  1

  4. INSTALL OIL PUMP ASSEMBLY 
    1. Install the oil pump assembly to the stiffening crankcase assembly with the 3 bolts.

      Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

  5. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

  6. INSTALL OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10

  7. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to INSTALLATION [10/2018 - ]

scientia non olet · About LEMON Manuals