LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Lubrication System (M20A-FXS) (Service Information)) >> Oil Pressure Switching Valve >> Removal [10/2018 - ] >> Procedure

Removal [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE REAR ENGINE UNDER COVER RH 

    See step  1

  2. REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY 
    1. Disconnect the oil pressure control valve assembly connector.
      GTY829501Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the No. 2 timing chain cover assembly.
scientia non olet · About LEMON Manuals