Installation [10/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ENGINE OIL LEVEL SENSOR
- Using an 8 mm socket wrench, install the engine oil level sensor to the engine balancer assembly with the 2 bolts.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
- Install a new clip to the engine oil level sensor.
- Connect the engine oil level sensor connector.
- Using an 8 mm socket wrench, install the engine oil level sensor to the engine balancer assembly with the 2 bolts.
- INSTALL OIL PAN SUB-ASSEMBLY
Refer to PROCEDURE - Step 10
- ADD ENGINE OIL
Refer to PROCEDURE - Step 5
- INSPECT FOR ENGINE OIL LEAK
Refer to PROCEDURE - Step 6
- CHECK ENGINE OIL LEVEL
Refer to PROCEDURE - Step 1
- INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Refer to PROCEDURE - Step 67 [10/2018 - 07/2022] , or refer to PROCEDURE - Step 67 [07/2022 - ]