Installation [10/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING)
- Install a new gasket to the engine water pump assembly (water inlet housing).
HINT:
Be sure to clean the contact surfaces.
- Install the engine water pump assembly (water inlet housing) to the cylinder block sub-assembly with the 4 bolts.
Torque: 43 N.m (438 kgf/cm, 32 ft.lbf)
- Install a new gasket to the engine water pump assembly (water inlet housing).
- INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
Refer to INSTALLATION [10/2018 - ]
- INSTALL INTAKE MANIFOLD
Refer to INSTALLATION [10/2018 - ]