LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Cooling System (M20A-FXS) (Service Information)) >> Cooling Fan Motor >> Removal [10/2018 - ] >> Procedure

Removal [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE RADIATOR ASSEMBLY 

    Refer to REMOVAL [10/2018 - 10/2019] , or refer to REMOVAL [10/2019 - ] 

  2. REMOVE FAN RH 
    1. Remove the 3 screws and fan RH from the cooling fan motor RH.
      GTY837384Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FAN LH 
    1. Remove the 3 screws and fan LH from the cooling fan motor LH.
      GTY821177Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. DISCONNECT COOLING FAN WIRE 
    1. Disengage the 3 clamps to disconnect the cooling fan wire from the fan shroud.
      GTY821182Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Lift up the lever to disengage the lock, and disconnect the cooling fan wire connector from the cooling fan motor RH.
  5. REMOVE COOLING FAN MOTOR LH 
    1. Remove the 3 screws and cooling fan motor LH from the fan shroud.
      GTY821180Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE COOLING FAN MOTOR RH 
    1. Remove the 3 screws and cooling fan motor RH from the fan shroud.
      GTY821179Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals