Installation [10/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL COOLING FAN MOTOR RH
- Install the cooling fan motor RH to the fan shroud with the 3 screws.
Torque: 3.9 N.m (40 kgf/cm, 35 in.lbf)
- Install the cooling fan motor RH to the fan shroud with the 3 screws.
- INSTALL COOLING FAN MOTOR LH
- Install the cooling fan motor LH to the fan shroud with the 3 screws.
Torque: 3.9 N.m (40 kgf/cm, 35 in.lbf)
- Install the cooling fan motor LH to the fan shroud with the 3 screws.
- CONNECT COOLING FAN WIRE
- INSTALL FAN LH NOTE:
Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.
- Install the fan LH to the cooling fan motor LH with the 3 screws.
Torque: 3.9 N.m (40 kgf/cm, 35 in.lbf)
- Install the fan LH to the cooling fan motor LH with the 3 screws.
- INSTALL FAN RH NOTE:
Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.
- Install the fan RH to the cooling fan motor RH with the 3 screws.
Torque: 3.9 N.m (40 kgf/cm, 35 in.lbf)
- Install the fan RH to the cooling fan motor RH with the 3 screws.
- INSTALL RADIATOR ASSEMBLY
Refer to INSTALLATION [10/2018 - 10/2019] , or refer to INSTALLATION [10/2019 - ]