LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Dynamic Radar Cruise Control System (Diagnostic Codes & Circuit Tests) (Hybrid)) >> DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model) >> DTC U0594-81: Invalid Data Received from Hybrid Powertrain Control Module Invalid Serial Data Received [10/2018 - ] >> Procedure

DTC U0594-81: Invalid Data Received from Hybrid Powertrain Control Module Invalid Serial Data Received [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR DTCs 
    1. Clear the DTCs.

      Powertrain > Radar Cruise2 > Clear DTCs 

    2. Make sure that the DTC detection conditions are met.

      HINT: 

      If the detection conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Powertrain > Radar Cruise2 > Trouble Codes 

      Result

      Result Proceed to
      DTC U059481 is not output A
      DTC U059481 is output B

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ] 

    Result: 

    REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  COMPONENTS [10/2018 - ]