LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Dynamic Radar Cruise Control System (Diagnostic Codes & Circuit Tests) (Hybrid)) >> DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model) >> DTC U0318-57: Software Incompatibility with Brake System Control Module Invalid/Incompatible Software Component [10/2018 - 07/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment.

    HINT: 

    Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

    One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [10/2018 - 07/2022]

    Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [10/2018 - 07/2022]

scientia non olet · About LEMON Manuals