LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Dynamic Radar Cruise Control System (Diagnostic Codes & Circuit Tests) (Hybrid)) >> DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model) >> DTC U0318-51: Software Incompatibility with Brake System Control Module Not Programmed [10/2018 - 07/2022] >> Procedure

DTC U0318-51: Software Incompatibility with Brake System Control Module Not Programmed [10/2018 - 07/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REPLACE FORWARD RECOGNITION CAMERA 
    1. Replace the forward recognition camera with a new one.

      Refer to REMOVAL [10/2018 - 07/2022]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CLEAR DTC 
    1. Clear the DTCs.

      Powertrain > Radar Cruise2 > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END