DTC U0318-51: Software Incompatibility with Brake System Control Module Not Programmed [07/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

REPLACE FORWARD RECOGNITION CAMERA

Replace the forward recognition camera with a new one.
Refer to REMOVAL [07/2022 - ]

Perform forward recognition camera adjustment.

HINT:

Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

One Time Recognition: Refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [07/2022 - ]

Sequential Recognition: Refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [07/2022 - ]

Driving Adjustment: Refer to DRIVING ADJUSTMENT [07/2022 - ]

Result

Proceed to
NEXT

Result:

See step 2

CLEAR DTC

Clear the DTCs.

Powertrain > Radar Cruise2 > Clear DTCs

Result

Proceed to
NEXT

Result:

END