LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Dynamic Radar Cruise Control System (Diagnostic Codes & Circuit Tests) (Hybrid)) >> DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model) >> DTC P0571-13: Brake Switch "A" Circuit Open [10/2018 - ] >> Description

DTC P0571-13: Brake Switch "A" Circuit Open [10/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake booster with master cylinder assembly) operates the stop light switch assembly (stop light control relay) to illuminate the stop lights.

If the hybrid vehicle control ECU receives a signal from the skid control ECU (brake booster with master cylinder assembly) indicating a malfunction of the stop light control relay, DTC P057113 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Note
P057113 Brake Switch "A" Circuit Open When the dynamic radar cruise control system is operating, the hybrid vehicle control ECU detects a signal indicating a stop light control relay malfunction from the skid control ECU (brake booster with master cylinder assembly) for approximately 1 second or more. Electronically controlled brake system Does not come on Cruise Control SAE Code: P0571