LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Dynamic Radar Cruise Control System (Diagnostic Codes & Circuit Tests) (Hybrid)) >> DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model) >> Cruise SET Indicator Light Circuit [10/2018 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Observe the following items for safety reasons when using the Techstream:

  • Before using the Techstream, read the instruction manual.
  • Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
    Fig 1: Warning: Do Not Operate The Techstream While Driving The Vehicle
    GTY681287Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  • When driving the vehicle for testing purposes, 2 people are required. One person should operate the Techstream while the other drives the vehicle.
    Fig 2: Warning: Operating Techstream While Driving Could Result In A Serious Accident
    GTY622669Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NOTE:
  • Before replacing the hybrid vehicle control ECU, refer to Registration.

    Refer to REGISTRATION [10/2018 - 10/2019] Refer to REGISTRATION [10/2019 - 07/2022] Refer to REGISTRATION [07/2022 - ]

  • When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.