LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Electronically Controlled Brake System (Diagnostic Codes) (1 Of 4) (Hybrid)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C1242: Open Circuit in IG1/IG2 Power Source Circuit [10/2018 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
C123B

Monitor runs whenever the following DTCs are not stored None
IG2 voltage Higher than 9.5 V
C123E

Monitor runs whenever the following DTCs are not stored None
Both of the following conditions are met A and B
A. IG1 voltage Higher than 9.5 V
B. Either of the following condition is met -
Vehicle speed Higher than 10 km/h (6 mph)
Communication status with hybrid control system Valid
scientia non olet · About LEMON Manuals