DTC C1211: SLA Linear Solenoid; DTC C1212: SLR Linear Solenoid; DTC C1225: SA1 Solenoid Circuit; DTC C1226: SA2 Solenoid Circuit [10/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Clear the DTCs.
Refer to DTC CHECK / CLEAR [10/2018 - ]
Chassis > ABS/VSC/TRAC > Clear DTCs
- Turn the power switch off.
- Turn the power switch on (IG).
- Check if the same DTC is output.
Refer to DTC CHECK / CLEAR [10/2018 - ]
Chassis > ABS/VSC/TRAC > Trouble Codes
HINT:
If a DTC for undervoltage is output, first troubleshoot the power source system.
Result
Result Proceed to DTCs C1211, C1212, C1225 and C1226 are not output. A A DTC related to low voltage is output. B DTCs C1211, C1212, C1225 and/or C1226 are output. C
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ]
Result:
B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2018 - 08/2021] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2021 - 07/2022] , or refer to DIAGNOSTIC TROUBLE CODE CHART [07/2022 - ]
Result:
C
REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY. Refer to REMOVAL [10/2018 - 07/2022] , or refer to REMOVAL [07/2022 - ]
- Clear the DTCs.