LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Electronically Controlled Brake System (Diagnostic Codes) (1 Of 4) (Hybrid)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C1210: Zero Point Calibration of Yaw Rate Sensor undone; DTC C1336: Zero Point Calibration of Deceleration Sensor undone [10/2018 - ] >> Component Operating Range

Component Operating Range

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

HINT: 

SAE code only.

C1336 (CASE 1 AND 2)

Both of the following conditions are met -
Acceleration sensor 1 zero point Higher than -0.9 m/s2 to less than 0.9 m/s2
Acceleration sensor 2 zero point Higher than -0.9 m/s2 to less than 0.9 m/s2
scientia non olet · About LEMON Manuals