LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Electronically Controlled Brake System (Diagnostic Codes) (3 Of 4) (Hybrid)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C1425: Open in Stop Switch Circuit; DTC P0573: Brake Switch "A" Circuit High [10/2018 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
ALL

Monitor runs whenever the following DTCs are not stored None
P0572

Both of the following conditions are met -
Serial communication with high side IC Valid
IG1 voltage Higher than 9.54 V
P0573

Serial communication with high side IC Valid