LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Control System (SFI) (M20A-FXS) - Diagnostic Codes (5 Of 6) (Hybrid)) >> SFI System >> DTC P1366-29: "E" Camshaft Position Actuator Bank 1 Signal Invalid [10/2018 - ] >> Monitor Strategy

Monitor Strategy

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
Related DTCs P1366: Motor drive VVT system control module performance
Required sensors/Components (Main) Cam timing control motor with EDU assembly
Required sensors/Components (Related) -
Frequency of Operation Continuous
Duration 3 seconds
MIL Operation Immediate
Sequence of Operation None
scientia non olet · About LEMON Manuals