LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Control System (SFI) (M20A-FXS) - Diagnostic Codes (5 Of 6) (Hybrid)) >> SFI System >> DTC P1366-29: "E" Camshaft Position Actuator Bank 1 Signal Invalid [10/2018 - ] >> Description

DTC P1366-29: "E" Camshaft Position Actuator Bank 1 Signal Invalid [10/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P001001.

Refer to DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P136629 "E" Camshaft Position Actuator Bank 1 Signal Invalid Malfunction in diagnostic signal (VTM) of cam timing control motor with EDU assembly is detected for 3 seconds (1 trip detection logic).
  • Cam timing control motor with EDU assembly
  • Open or short in cam timing control motor with EDU assembly circuit
  • ECM
Comes on DTC stored SAE Code: P1366