Removal [10/2018 - 07/2022]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to REMOVAL [10/2018 - 07/2022]
- REMOVE FUEL SENDER GAUGE ASSEMBLY
- Disconnect the fuel sender gauge assembly connector.
- Disengage the 3 clamps to disconnect the wire harness.NOTE:
- Do not damage the wire harness.
- When disengaging each wire harness from the clamp, disengage one wire at a time.
- Disengage the claw to remove the fuel sender gauge assembly and fuel gauge bracket from the fuel suction tube with pump and gauge assembly.NOTE:
Be careful not to bend the arm of the fuel sender gauge assembly.
- Disconnect the fuel sender gauge assembly connector.