Removal [10/2018 - 07/2022]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to REMOVAL [10/2018 - 07/2022]
- REMOVE FUEL PRESSURE REGULATOR HOLDER
- REMOVE FUEL MAIN VALVE ASSEMBLY
- Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel suction tube with pump and gauge assembly.
*a Protective Tape NOTE:Pull out the fuel main valve assembly carefully because the O-ring is firmly installed between the fuel main valve assembly and the fuel suction tube with pump and gauge assembly.
- Remove the O-ring from the fuel main valve assembly.
*1 O-ring *a Mesh *b Mini-clip NOTE:Do not remove the mesh and mini-clip from the fuel main valve assembly.
- Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel suction tube with pump and gauge assembly.