LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Emission Control System (M20A-FXS) (Service Information)) >> Purge Valve >> Removal [10/2018 - ] >> Procedure

Removal [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE PURGE VALVE (PURGE VSV) 
    1. Disconnect the purge valve (purge VSV) connector.
      GTY800580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 1 Fuel Vapor Feed Hose
      *2 No. 2 Fuel Vapor Feed Hose
      *3 Purge Valve (Purge VSV)
    2. Disengage the wire harness clamp and disconnect the engine wire.
    3. Disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).
    4. Disconnect the No. 2 fuel vapor feed hose from the purge valve (purge VSV).
    5. Remove the bolt.
    6. Disengage the guide and remove the purge valve (purge VSV) from the air cleaner cap with air cleaner hose.
scientia non olet · About LEMON Manuals