LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Emission Control System (M20A-FXS) (Service Information)) >> PCV Valve >> Inspection [10/2018 - ] >> Procedure

Inspection [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 
    1. Install a hose to the PCV valve (ventilation valve sub-assembly).
    2. Check PCV valve (ventilation valve sub-assembly) operation.
      1. Blow air into the cylinder head sub-assembly side, and check that air passes through easily.
        GTY745413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Hose
        *b Air
        Cylinder Head Sub-assembly Side
        WARNING:

        Do not suck air through the valve.

        Petroleum substances inside the valve are hazardous to your health.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

      2. Blow air into the intake manifold side, and check that air passes through with difficulty.
        GTY747317Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Hose
        *b Air
        Intake Manifold Side
        WARNING:

        Do not suck air through the valve.

        Petroleum substances inside the valve are hazardous to your health.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

    3. Remove the hose from the PCV valve (ventilation valve sub-assembly).