LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System (SFI) (M20A-FXS) - Diagnostic Codes (2 Of 6) (Hybrid)) >> SFI System >> DTC P0190-2A: Fuel Rail Pressure Sensor "A" Signal Stuck in Range; DTC P019064: Fuel Rail Pressure Sensor "A" Signal Plausibility Failure [10/2018 - ] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
STUCK MONITOR

Malfunction counter 5 times or more
Fuel pressure sensor (for high pressure side) output deviation Less than 0.3 MPa (3.1 kgf/cm2 , 43.5 psi)
CORRELATION MONITOR WITH BAROMETRIC PRESSURE

Malfunction counter 5 seconds or more
Fuel pressure sensor (for high pressure side) output Less than -1.881 MPa (-19.2 kgf/cm2 , -273 psi), or higher than 2.543 MPa (25.9 kgf/cm2 , 369 psi)
scientia non olet · About LEMON Manuals