LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System (M20A-FXS) (Service Information) (Hybrid) >> Mass Air Flow Meter >> Removal [10/2018 - ] >> Procedure

Removal [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the mass air flow meter connector.
      GTY819565Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and mass air flow meter from the air cleaner cap sub-assembly.
      NOTE:

      If the mass air flow meter has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals