LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System (M20A-FXS) (Service Information) (Hybrid) >> Mass Air Flow Meter >> Inspection [10/2018 - ] >> Procedure

Inspection [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT MASS AIR FLOW METER 
    1. Perform a visual check for any foreign matter on the temperature sensor (thermistor) of the mass air flow meter shown in the illustration.
      GTY828329Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Thermistor

      OK

      There is no foreign matter.

      If the result is not as specified, replace the mass air flow meter.

scientia non olet · About LEMON Manuals