Removal [10/2018 - 07/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR ENGINE UNDER COVER LH
Refer to PROCEDURE - Step 1 Refer to PROCEDURE - Step 1
DRAIN ENGINE COOLANT
Refer to PROCEDURE - Step 2 Refer to PROCEDURE - Step 2
REMOVE INVERTER WITH CONVERTER ASSEMBLY
Refer to REMOVAL [10/2018 - 07/2022]

REMOVE ENGINE COOLANT TEMPERATURE SENSOR

Disconnect the engine coolant temperature sensor connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the clip and engine coolant temperature sensor from the water outlet.

NOTE:

If the engine coolant temperature sensor has been struck or dropped, replace it.