Removal [10/2018 - 07/2022]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to REMOVAL [10/2018 - 07/2022]

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [10/2018 - 07/2022]

REMOVE CAM TIMING CONTROL MOTOR WITH EDU ASSEMBLY

Disconnect the cam timing control motor with EDU assembly connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 3 bolts and cam timing control motor with EDU assembly from the No. 2 timing chain cover assembly.
NOTE:
If the cam timing control motor with EDU assembly has been struck or dropped, replace it.

REMOVE CAM TIMING CONTROL MOTOR O-RING

Remove the cam timing control motor O-ring from the No. 2 timing chain cover assembly.