LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System (M20A-FXS) (Service Information) (Hybrid) >> AIR FUEL RATIO SENSOR (for Sensor 1) >> Inspection [10/2018 - ] >> Procedure

Inspection [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT AIR FUEL RATIO SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY746377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Air Fuel Ratio Sensor)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
      1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher

      If the result is not as specified, replace the air fuel ratio sensor.

scientia non olet · About LEMON Manuals