LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Hybrid Control System (Diagnostic Codes) (1 Of 5)) >> Hybrid Control System >> DTC P0A81-00: Hybrid/EV Battery Cooling Fan 1 Control Circuit High; DTC P0A8115: Hybrid/EV Battery Cooling Fan 1 Circuit Short to Auxiliary Battery or Open [10/2018 - ] >> Procedure

DTC P0A81-00: Hybrid/EV Battery Cooling Fan 1 Control Circuit High; DTC P0A8115: Hybrid/EV Battery Cooling Fan 1 Circuit Short to Auxiliary Battery or Open [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (HYBRID CONTROL) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
    4. Check for DTCs.

      Powertrain > Hybrid Control > Trouble Codes 

      Result

      Result Proceed to
      "P0AFC00 or P0AFC96" is not output. A
      "P0AFC00 or P0AFC96" is also output. B
    5. Turn the power switch off.

    Result: 

    GO TO DTC CHART (HYBRID CONTROL SYSTEM). Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2018 - ] 

    Result: 

    See step  2

  2. CHECK BATTERY VOLTAGE SENSOR (FREQUENCY) 

    See step  6

    Result

    Proceed to
    OK
    NG

    Result: 

    OK 

    REPLACE BATTERY COOLING BLOWER ASSEMBLY. Refer to  REMOVAL [10/2018 - ] 

    Result: 

    NG 

    REPLACE BATTERY VOLTAGE SENSOR. Refer to  REMOVAL [10/2018 - 07/2022]  Refer to  REMOVAL [07/2022 - ]